Popular Products

  1.    VisorTag®  Vertical   Handicapped Parking Placard Holder & Protector  (Closed this week. Orders will ship on 12/10/18)

    VisorTag® Vertical Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $19.99

    •    Sturdy 85 mils thick crystal clear plastic holder that will NOT melt, bend, or break

    •    Strong holder that safely holds, protects and preserves your tag forever

    •    Easy to install. Clips onto visor; no adhesive or nylon strips, and no hardware needed

    •    One step to display. Simply swing it down. No flipping or rotating visor/tag is needed

    •    One step to put away. Simply flip it up. Strong magnets hold it in stored position

    •    No more hanging and removing or struggling to find mirror post

    •    Easy to transfer to another car. Simply pull it off of one visor and clip it on to another

    •    Save money on replacement cost due to damages caused by heat and repeated handling

    •    Holder outline dimensions:  10.0" X 3.5"

    •    Tag size accepted: Length = 9.25" maximum; Width = 3.5" or higher (open sides)

    •    Made and patented in USA  


    Learn More
  2. Mirortag Silver for Louisiana & Indiana Handicap Parking Placard   (Closed this week. Orders will ship on 12/10/18)

    Mirortag Silver for Louisiana & Indiana Handicap Parking Placard (Closed this week. Orders will ship on 12/10/18)

    • Eliminates the pain & frustration to hang and remove your placard. Snap it on with your eyes closed •Tough sturdy detachable hook will not break or melt •Easy to transfer between cars. Extra hooks can be purchased seperately •Tag size: L=6", W=4". Mirror post Diameter: 1". Check our store for other sizes •Made in USA. Patent pending. Learn More
  3. VisorTag® Horizontal   Handicapped Parking Placard Holder & Protector  (Closed this week. Orders will ship on 12/10/18)

    VisorTag® Horizontal Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $19.99

    •    Sturdy 60 mils thick crystal clear plastic holder that will NOT melt, bend, or break

    •    Strong holder that safely holds, protects and preserves your tag forever

    •    Easy to install. Clips onto visor; no adhesive or nylon strips, and no hardware needed

    •    One step to display. Simply swing it down. No flipping or rotating visor or tag is required

    •    One step to put away. Simply flip it up. Strong magnets hold it in stored position

    •    Easy to locate, always stored onto visor

    •    No more hanging and removing or struggling to find mirror post

    •    Easy to transfer to another car. Simply pull it off of one visor and clip it on to another

    •    Save money on replacement cost due to damages caused by heat and repeated handling

    •    Holder outline dimensions: 9.0" X 4.86"

    •    Tag size accepted: Length = 9" or longer (opend ends); Width = 4.16" maximum

    •    Patented and proudly made in USA

    •    100% satisfaction guaranteed or your maoney back

    Learn More
  4. MirorTag™ Gold   Handicapped Parking Placard Holder & Protector  (Closed this week. Orders will ship on 12/10/18)

    MirorTag™ Gold Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $17.76

    • Sturdy crystal clear plastic holder that will NOT melt, bend, or break

    • Strong holder that safely holds, protects and preserves your tag

    • Easy to install. Hang the hook only once. No adhesive, or nylon strips, or hardware needed

    • One step to display. Snaps to hook behind rearview mirror. Strong magnets hold it in position

    • One step to put away. Simply pull it down to detach it from hook

    • No more hanging and removing or struggling to find mirror post

    • Easy to transfer to another car. Transfer hook from one car to another, or buy extra hooks

    • Saves you money on replacement cost due to damages caused by heat and repeated handling

    • Tag Dimensions: Length= 9.25" max (trim blank tag section off if needed to fit). Width= 3.5" or wider since sides are open

    • Patent pending and proudly made in USA

    Learn More
  5. MirorTag™ Gold Plus  Handicapped Parking Placard Holder & Protector    (Closed this week. Orders will ship on 12/10/18)

    MirorTag™ Gold Plus Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $19.95

    • Sturdy crystal clear plastic holder that will NOT melt, bend, or break

    • Strong holder that safely holds, protects and preserves your tag

    • Easy to install. Hang the hook only once. No adhesive, or nylon strips, or hardware needed

    • One step to display. Snaps to hook behind rearview mirror. Strong magnets hold it in position

    • One step to put away. Simply pull it down to detach it from hook

    • No more hanging and removing or struggling to find mirror post

    • Easy to transfer to another car. Transfer hook from one car to another, or buy extra hooks

    • Saves you money on replacement cost due to damages caused by heat and repeated handling

    • Tag Dimensions: Length= 10.75" max . Width= 3.625" or wider since sides are open

    • Patent pending and proudly made in USA

    Learn More
  6. VisorTag®   Elementary Student and Daycare Pick Up/Drop off Permit Holder & Protector    (Closed this week. Orders will ship on 12/10/18)

    VisorTag® Elementary Student and Daycare Pick Up/Drop off Permit Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $19.95

    SPECIAL PRICING FOR SCHOOL OFFICIALS AND FUNDRAISERS

    •    Sturdy crystal clear plastic holder that will NOT melt, bend, or break

    •    Strong holder that safely holds, protects and preserves your tag

    •    Easy to install. Clips onto visor, no adhesive, or nylon strips, or hardware needed

    •    One step to display. Simply swing it down. No flipping or rotating visor or tag is needed

    •    One step to put away. Simply flip it up. Strong magnets hold it in stored position

    •    Easy to locate. No need to search for it, always stored onto visor

    •    No more hanging and removing or struggling to find mirror post

    •    Easy to transfer to another car. Simply pull it off of one visor and clip it on to another

    •    Holder outline dimensions: 9.0" X 4.86"

    •    Tag size accepted: Length = 9" or hihger; Width = 4.16" maximum

    •    Patented and proudly made in USA

    Learn More
  7. VisorTag®  Parking Permit Tag Holder for Train Pass, College, Hospital, High School, Season Pass & more   (Closed this week. Orders will ship on 12/10/18)

    VisorTag® Parking Permit Tag Holder for Train Pass, College, Hospital, High School, Season Pass & more (Closed this week. Orders will ship on 12/10/18)

    $16.45

    •    Sturdy crystal clear plastic holder that will NOT melt, bend, or break

    •    Strong holder that safely holds, protects and preserves your tag

    •    Easy to install. Clips onto visor, no adhesive, or nylon strips, or hardware needed

    •    One step to display. Simply swing it down. No flipping or rotating visor or tag is needed

    •    One step to put away. Simply flip it up. Strong magnets hold it in stored position

    •    Easy to locate. No need to search for your tag, always stored onto visor

    •    No more hanging and removing or struggling to find mirror post

    •    Easy to transfer to another car. Simply pull it off of one visor and clip it on to another

    •    Save money on replacement cost due to damages caused by heat and repeated handling

    •    Holder outline dimensions: 6.21" X 3.5"

    •    Tag size accepted: Length = 5.45" maximum; Width = 3.5" or higher (open sides)

    •    Patented and made in USA

     

    Learn More
  8. MirorTag™ Silver   Handicapped Parking Placard Holder & Protector   (Closed this week. Orders will ship on 12/10/18)

    MirorTag™ Silver Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $7.99

    • Safely holds, protects and preserves your tag, and ON and OFF in a snap.

    • Easy to install. Hang the hook only once. No adhesive, or nylon strips, or hardware needed

    • One step to display. Snaps to hook behind rearview mirror. Strong magnet holds it in position

    • One step to put away. Simply pull it down to detach it from hook

    • No more hanging and removing or struggling to find mirror post

    • Easy to transfer to another car. Transfer hook from one car to another, or buy extra hooks

    • Saves you money on replacement cost due to damages caused by heat and repeated handling

    • Tag Dimensions: Length= 10" max. Width= 4" 

    • Patent pending and proudly made in USA

    Learn More
  9. MirorTag™ Charm Handicapped Parking Placard Holder & Protector   (Closed this week. Orders will ship on 12/10/18)

    MirorTag™ Charm Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $7.99

    • Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive

    • No need to look for mirror post, snap it on with your eyes closed. Fits all Mirorr posts regardless of size

    • Protects and preserves the condition of your parking placard permit

    • Tough sturdy Magnet Charm guaranteed to resist hot and cold conditions. Will NOT bend, melt or break

    • Tag size: 4.125" W by 10" L

    • Easy to transfer to another vehicle if needed

    Learn More
  10. WindshieldTAG™ Silver Handicapped Parking Placard Holder & Protector  (Closed this week. Orders will ship on 12/10/18)

    WindshieldTAG™ Silver Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $7.99

    • Industrial grade suction cup with built in strong magnet • Safely holds, protects and preserves your tag, and ON and OFF in a snap. • Easy to install. Apply the suction cup only once. No adhesive, or nylon strips, or hardware needed • One step to display. Snaps to hanging magnet behind rearview mirror. Strong magnet holds it in position • One step to put away. Simply pull it down to detach it from the magnet • No more hanging and removing or struggling to find mirror post • Easy to transfer to another car. Transfer suction cup magnet from one car to another, or buy extra one • Saves you money on replacement cost due to damages caused by heat and repeated handling • Tag Dimensions: Length= 10" max. Width= 4" • Patent pending and proudly made in USA Learn More
  11. MirorTag™ Bronze  Handicapped Parking Placard Holder & Protector  (Closed this week. Orders will ship on 12/10/18)

    MirorTag™ Bronze Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $6.99

    • Safely holds, protects and preserves your tag, and ON and OFF in a snap.

    • Easy to install. Peel & stick the magnet to the rearview mirror once. No adhesive, or nylon strips, or hardware needed

    • One step to display. Snaps to magnet behind rearview mirror. Strong magnet holds it in position

    • One step to put away. Simply pull it down to detach it from hook

    • No more hanging and removing or struggling to find mirror post

    • Easy to transfer holder between cars. Buy extra magnets for extra cars and transfer the holder only

    • Saves you money on replacement cost due to damages caused by heat and repeated handling

    • Tag Dimensions: Length= 10" max. Width= 4" 

    • Patent pending and proudly made in USA

    Learn More
  12. EZ Pass-Port™   Unbreakable Toll Pass Holder for NEW and OLD E-Z Pass, I Pass, PalPass, Fastrak, NC Quick Pass & more   (Closed this week. Orders will ship on 12/10/18)

    EZ Pass-Port™ Unbreakable Toll Pass Holder for NEW and OLD E-Z Pass, I Pass, PalPass, Fastrak, NC Quick Pass & more (Closed this week. Orders will ship on 12/10/18)

    $6.50

    • Securely holds Old & New transponder boxes

    • Easy to install & remove - no need to remove factory installed strips

    • No adhesive or nylon strips

    • Indestructible and will not melt or crack or spin or vibrate

    • Easy to transfer between cars

    • Mount it anywhere on your windshield

    • Sun and cold resistant

    • Industrial grade suction cup

    • Lifetime warranty

    • US Patent & Made in USA

     

    Learn More
  13. EZ Pass-Mate™ Clear Toll Pass Holder for ALL EZPass models including HOV switch  (Closed this week. Orders will ship on 12/10/18)

    EZ Pass-Mate™ Clear Toll Pass Holder for ALL EZPass models including HOV switch (Closed this week. Orders will ship on 12/10/18)

    $6.50

    Thick and Durable plastic, Clear

    Easy to install & remove

     Will not rattle, spin, break, warp, discolor or melt   

     Easy access to HOV switch

    • Dual suction cups for stability 

    Fits all EZ Pass & I Pass & Izoom models

    No messy adhesive on windshield

     

     

    Learn More
  14. EZ Pass-Mate™ Black Toll Pass Holder for ALL EZPass models including HOV switch   (Closed this week. Orders will ship on 12/10/18)

    EZ Pass-Mate™ Black Toll Pass Holder for ALL EZPass models including HOV switch (Closed this week. Orders will ship on 12/10/18)

    $6.50

    Thick and durable plastic, black

    Easy to install & remove

    Will not rattle, spin, break, warp, discolor or melt  

     Easy access to HOV switch

     Dual suction cups for stability 

    Fits all EZ Pass & I Pass & Izoom models

    No messy adhesive on windshield

    Learn More
  15. EZ Pass-Mate for Good To Go Flex Pass, HOV ExpressToll, & MnPASS Tag    (Closed this week. Orders will ship on 12/10/18)

    EZ Pass-Mate for Good To Go Flex Pass, HOV ExpressToll, & MnPASS Tag (Closed this week. Orders will ship on 12/10/18)

    • Fits Washington state Good To Go Flex Pass, new Minnesota MnPASS Switchable Tag, and Colorado state ExpressToll Switchable HOV Transponder. • Engineered to be the strongest, most compact, safest, and unmatched USA quality product • Novel design allows for 3 sizes of suction cups: two Small recommended for switchable HOV tags (as in this model), one Medium, or one Large for standard toll pass. • Clear color for toll authority to see your transponder and avoid fines when in question, but fades out the adhesive strips unattractive look behind its frosty face. • Easy to attach and remove. Register more vehicles for same toll tag, and easily move the transponder from one vehicle to another, and even to rental car. • Comes with 4 original 3M dual-lock strips and 2 alcohol cleaning wipes. 2 strips already attached to holder, and 2 to use on your toll tag to mate with the attached ones. • 100% satisfaction guaranteed or your money back. Proudly designed & Made in USA Learn More
  16. 2 Hooks for MirorTag™ for Additional Vehicles    (Closed this week. Orders will ship on 12/10/18)

    2 Hooks for MirorTag™ for Additional Vehicles (Closed this week. Orders will ship on 12/10/18)

    $5.99

    • Super Strong magnet

    • Easy to hang to rearview mirror post

    • Remains hidden behind mirror and Will not block your view

    • No more hanging and removing or struggling to find mirror post

    • Install one hook to each car once

    • Tough & Durable plastic. Sun and cold resistant

    • Works on all MirorTag models

    • Made in USA

    Learn More
  17. 2 Magnet Charms for MirorTag™ for Additional Vehicles   (Closed this week. Orders will ship on 12/10/18)

    2 Magnet Charms for MirorTag™ for Additional Vehicles (Closed this week. Orders will ship on 12/10/18)

    $5.99

    • Super Strong magnet

    • Adjustable length to fit all rearview mirror posts

    • Easy to attach to rearview mirror post

    • Remains hidden behind mirror and Will not block your view

    • No more hanging and removing or struggling to find mirror post

    • Install one Magnet Charm to each car once

    • Tough & Durable plastic. Sun and cold resistant

    • Works on all MirorTag models

    • Made in USA

    Learn More
  18. 2 Suction Cups with Magnet Charms for All Mirortag and Windshieldtag Holders   (Closed this week. Orders will ship on 12/10/18)

    2 Suction Cups with Magnet Charms for All Mirortag and Windshieldtag Holders (Closed this week. Orders will ship on 12/10/18)

    $6.39

    • Industrial grade suction cup with built in super strong magnet

    • Attach it wherever you like on your windshield

    • Easily snap on and off your permit placrad to the hanging magnet

    • Use on Mirortag and WindshieldTAG placard holders by JL Safety

    • Suction cup and magnet only. Holder is not included. Made in USA

    Learn More
  19. 2 Storage Magnet for MirorTag™   (Closed this week. Orders will ship on 12/10/18)

    2 Storage Magnet for MirorTag™ (Closed this week. Orders will ship on 12/10/18)

    $5.49

    • Super Strong Rare Earth Magnet

    • Easy to install

    • Too small to be noticed

    • No more struggling to find your tag

    • Tough and durable. Sun and cold resistant

    • Made in USA

       

    Learn More
  20. Replacement Magnets for Visortag®  (Closed this week. Orders will ship on 12/10/18)

    Replacement Magnets for Visortag® (Closed this week. Orders will ship on 12/10/18)

    $3.49

    • Super Strong Rare Earth Magnet

    • Easy to install

    • Self adhesive

     

       

    Learn More
  21.    WindshieldTag™   Handicapped Parking Placard Holder & Protector    (Closed this week. Orders will ship on 12/10/18)

    WindshieldTag™ Handicapped Parking Placard Holder & Protector (Closed this week. Orders will ship on 12/10/18)

    $18.95

    •    Sturdy crystal clear plastic holder that will NOT melt, bend, or break

    •    Strong holder that safely holds, protects and preserves your tag

    •    Easy to install to windshield, no adhesive, or nylon strips, or hardware needed

    •    May be always displayed, or easily removed if needed. No flipping or rotating visor is required

    •    No more hanging and removing or struggling to find mirror post

    •    Easy to transfer to another car. Simply pull it off of one windshield and press it on to another

    •    Save money on replacement cost due to damages caused by heat and repeated handling

    •    Holder outline dimensions:  10.0" X 3.5"

    •    Tag size accepted: Length = 9.25" maximum; Width = 3.5" or higher (open sides)

    •    Patents pending

    •    Made in USA  

    Learn More
  22. 12 Replacement Suction Cup Small 1.125"- Fits JL Safety EZ Pass-Mate & EZ Flex-Port holders (Closed this week. Orders will ship on 12/10/18)

    12 Replacement Suction Cup Small 1.125"- Fits JL Safety EZ Pass-Mate & EZ Flex-Port holders (Closed this week. Orders will ship on 12/10/18)

    $5.99

    • 1 1/8 inch diameter, mushroom head suction cup

    • Industrial grade with light diffusing rings

    • Fits EZ Pass-Mate and EZ Flex-Port holders as replacement Pack of 12  

    •  Made in USA

    Learn More
  23. 6 Replacement Suction Cup Medium 1.75"- Fits JL Safety EZ Pass-Port holder clip  (Closed this week. Orders will ship on 12/10/18)

    6 Replacement Suction Cup Medium 1.75"- Fits JL Safety EZ Pass-Port holder clip (Closed this week. Orders will ship on 12/10/18)

    $5.99

    • 1 3/4 inch diameter, mushroom head suction cup

    • Industrial grade with light diffusing rings

    • Fits EZ Pass-Port clip as replacement Pack of 6  

    •  Made in USA

    Learn More

23 Item(s)

per page

Set Descending Direction